PRODUCTS

2-Side Chipping Edger

• Feed speed 150 FPM to 400 FPM
• Chip length: ½” to 7/8”
• Set works included: 4” to 12”
• Motor hp range: 75 -100 hp

4-Side Cant Machine

• Chip length 5/8” to 1”
• Log Dia.: 12” max
• Cant: 3”-10”
• Motor hp range: 75-150 hp

2-Side Cant Machine

• Chip length 5/8” to 1”
• Log Dia.: 12” max
• Cant: 3”-10”
• Motor hp range: 75-150 hp

4-6 Double Vertical Gang Saw

• Feed speed: Up to 270 FPM
• Cuts: 150 to 160 Kerf
• Capability: One 6 x 6 into three 1 ¾ x 6 or 1 4 x 4 into two 1 ¾” x 1 ¾”
• Motor hp range: 100-150 hp

Splitter Saws

• Custom Design tailored to Customer Requirements
• Knurled Feed Rolls
• Precision Ground Saws for Smooth Finish

Two Saw Edger with Reman

• Feed Speed: 350 FPM
• Max input dimensions: 4”thk x 24” wide
• Finished Saw Cut: 2”, 4”, 6”, 8”, 10”, 12”
• Feed Works: Powered with Two 7 ½ hp Drives
• Saws: Powered with two 75 hp TEFC Motors
• Cutter Head: Powered with 100 hp TEFC Motor

In-feed Decks for Logs, Cants, & Slabs

• Lengths to Suit the Operation
• Speeds: Constant or Variable Speed to match
• Can be equipped with Line Bar, Jump Chain and Board Turner
• Complete with rolls, roller bearings, chain drives and cylinders

Top Saw Edger

• Feed Speed: 300 FPM
• Max Size Material input: 4” thk. X 24” W.
• Finished Saw Cut: 2”, 4”, 6”, 8”, 10”, 12”
• Feed Works: Powered with Two 5 hp Drives
• Saw: Powered with two 75 hp TEFC Motors
• Top Feed: 10” dia. Machined Tooth Rolls
• Bottom Feed: Sharp Chain with Side Guides

MACO Stud Machine

• Feed Speed: 130 FPM
• Log Size: 4”x 11” max.
• Finished Cant: 4”x 8” max 2”x 8”min.
• Hydraulically operated adjustments to infeed chain height
• Overhead Rollers Raised and Lowered with Air Cylinders, 5hp
• Two Vertical Infeed Roll Assemblies
• Bottom Segment Heads w/Profile Driven by 75 hp TEFC Motors and Mounted on Spherical Roller Bearings.

Stick Breaker

• Designed to break Single or Multiple Numbers of Stacking Sticks
• Capable of Breaking 2x4’s into pieces varying from 1” to 3” long.
• Capacity: 3 tons/day
• Motor: 5 hp TEFC

Slabbing Edger

• Feed Speed: 150 FPM
• Chip Length: ½” to 7/8”
• Setworks included: 1”, 2”, and 10” opening for Knife Changing
• Motor Size Range: 100 to 250 hp
• Other Features per your Specifications

Unscramblers

• Five Chain Sections to Effectively Sort Lumber
• TEFC Motor Drive
• Structural Steel Frame
• Heavy duty Chain Drive and Roller Bearings

Jump Chain and Board Turner

• Works on In-Feed Decks to Route the Lumber in Different Directions

Sharp Chain Turner System

• Log Turner
• Thumper Rolls
• Belt Conveyor
• Drives with Hydraulic Motors
• Hydraulic Power Unit

Log Turner—Model 80-001

• Designed to Turn a Log as it Moves Down a Conveyor—Turns in One direction to position for cutting
• Fabricated Steel Structures w/6” O.D. Turning Cylinders.
• 70” high x 63” W. x 26” dp.
• Log Sizes: 6” Dia. min to 18” Dia. max.x 20 Ft
• Hydraulically Driven

Log Turner—Model 3-014

• Centers a log onto Sharp Chain or Carriage
• Rotates Log into Position for Maximum Yield.
• Hydraulically Driven